Juicers and Healing Products of Australia

Product Categories
Juicers, Wheatgrass - Manual Poly Juicers
Juicers, Wheatgrass - Manual Metal Juicers
Juicers, Wheatgrass - Electric Juicers
Air Ionizers - for home
Amazing Water
Blenders - heavy duty
Books - Juicing, fasting, wheatgrass
Breathing/Stress Relief - Resperate
Coconut Scrapers
Dehydrators
Electric Food Smoker - Anuka
Far Infra Red Saunas
Foot Patches - detox
Grain Mills - Manual
Grain Mills - Electric, Australia & Export
Grain Crackers
Grain Mill - Elect Wonder Mill for USA
Himalayan Rock Salt Lamps
Hulda Clark - Anti-parasite herbs
Lymphacisers, (trampolines) RH48
Meters for measuring - Water quality
Miracle II Soap & Neutraliser
Nutcrackers - Macadamia Nuts
Nutritional - Antioxidants
Oralmat Drops - for Coughs and Colds
Replacement Filters - Water ionizers
Seed Sprouters
Shower Filter
Survival, outdoor and camping equipment
Trifield Meters - EMR Meters
Vacuum Sealer - Home
Vacuum Sealer - Commercial
Vacuum Sealers - manual
Water Distillers - electrical types
Water Ionizers - Alphion/MicroLite/Melody
Wellness Water Filtration
Zen Chi Foot Massager

Current Category
Meters for measuring - Water quality

The Quality of water can be tested by the following meters, to find Conductivity,
(parts per million TDS), PH (acid/alkaline) and ORP. (indicates presence of antioxidants) 

	Smart SM100 PH meter This unit comes with probes to test your water for acid/alkaline values, (but also can be used for most liquids), and also a 20ml satchet of calibration solution. Or if the unit is to be used often, purchase an extra container ( 185 ml ) of the solution for $7.50. As an example, if the unit is used daily, clean and recalibrate the unit (couple of minutes only) each week, you will then continue to get accurate readings.  Range: 0.0 - 14.0 pH Resolution: 0.1 pH Accuracy: + or - 0.2 pH Calibration: Manual 2 point Battery: 9 Volt battery Life: 300 Hours Environment: 0 - 50 degrees C/95% RH Max. Dimensions: 80x145x35mm		Price:	QTY:

	Smart SM500 ORP meter This unit could well be the most important of meters, as it measures antioxidant activity in the liquid. Increased presence of negatively charged hydrogen ions in any liquid for consumption, makes it beneficial to health and well being, see Microhydrin under nutritional formulations. In the absence of an adequate supply of these, intracellular function, communication and energy production are inhibited, toxins and free radicals accumulate and health deteriates. Tap water has minimal quantity, while fresh juices and real spring water, would have an abundance. Adding spirulina powder to tap water makes it an antioxidant. Comes with platinum electrode and 9 volt battery and is pre-calibrated, requiring only cleansing solution for electrodes included. Range: + or - 1000 mV Resolution: 1 mV Accuracy: + or - 5 mV Battery: 9 volt, 300 hours of use. Environment: 0 - 50 degrees C/95% RH Max Dimensions: 80x145x35mm  This unit can also be used to measure Chlorine levels in water, as it measures increased oxidising activity when chlorine is added, this gives a higher reading on the scale, while the water increases it's ability to kill microorganisms..A primary advantage of this is that it provides the operator with a rapid and single valued assessment of the sanitising activity in the water. Studies have shown that an ORP value of 650 mv or greater indicates that there is enough oxidising activity to kill most bacteria and viruses in seconds.		Price:	QTY:

	Smart EC Conductivity Meter SM-301 Measures parts per million of total dissolved solids, but in microS/cm, as would occur in tap water which has many dissolved solids, due to additives etc. SM 301 Standard Meter Range: 10 - 1990 uS/cm (or more sensitive model SM-302,  0 - 10.0 mS/cm for specialised applications, same price) Resolution: 10 uS/cm  (Model SM-302 has resolution of 0.1 mS/cm) Accuracy: + or - 2% full scale Calibration: manual 1 point Battery life: 1x 9 V battery / 300 hours Environment: 0 - 50 degrees C / 95% RH Max Dimensions: 80x145x35mm                                    Electrode cleaning solution included 15ml, or purchase extra 185ml for $7.50, max 6 month shelf life, order manually As an alternative to the above meter, which shows readings in microS/cm, the more accurate calibration type, we also have available meters that read in parts per million, the standard US measuring system, with a slightly more coarse calibration. (PPM) SM-401: For lower readings on the scale, from 10 - 1990 PPM, being more accurate for the lower range. SM-402  For all readings over the whole scale, up to 10,000 PPM , more suited to bore water & hydroponics, calibrated in g/l  range:  0 - 10 g/l  (1 g/l = 1000 PPM) To purchase one of these models, simply select the standard model (same price) and put under special instructions, the model number you require.		Price:	QTY:

	Martini ORP, Temp & pH Meter   Combination waterproof testers with advanced functionsalso include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD.  It shows readings in an extended range from -2.00 to 16.00 pH or ±1999 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F.  The pH58 has a stability indicator and hold feature that freezes the display for easy and accurate recording.  The large display also has graphic symbols to guide you through all operations.  Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.  The modular design allows easy electrode and battery replacement. Instructions for use of pH58, model recommended for most general purpose use/practitioners/clinics :  Buffer 4 and 7 solution is included to check accuracy of the pH reading. The buffer 7 is close to the characteristics of storage solution. So buffer 7 can be used on a small piece of sponge rubber inserted into the cap, to keep electrodes moist. Ensure that electrodes are kept clean after use, wash them under tap, use tooth brush if required, then apply the storage solution equivalent, buffer 7. If after many months of use the readings no longer appear accurate due to plaque or other left to build up on electrodes, use very fine emery paper to clean. The ORP MA9020 is used only to recalibrate the unit, we advise not to use this, as in nearly all cases any variation in reading is caused by plaque build up, and the unit is factory pre-set, so any attempts at re-adjusting this could compromise the accuracy of the unit. When the set button is pressed, it will switch between Millivolt orp readings plus temperature below and PH readings will display by itself.		Price:	QTY:

	Professional ORP, Temp & pH Meter  PROFESSIONAL PORTABLE METERS The very best of our meters for the more professional industrial/commercial use                                        Extended range pH/ORP/Temperature meter                    SM 106 - Measure pH, ORP and Temperature with one single electrode - With Stability Indicator and Hold Feature Specifications: Range -2.00 - 16.00 pH -2000 - +2000 mV -5.0 - 80.0°C 23.0 - 176.0°F   Resolution 0.01 pH 1 mV 0.1°C 0.1°F Accuracy ± 0.02 pH ± 2 mV ± 0.5°C to 60.0°C; ± 1°C outside ± 1 up to 140.0°F; ± 2°F outside Typical EMC Deviation ± 0.02 pH ± 2 mV ± 0.2°C Temperature Compensation Automatic from -5 to 80°C/23 to 176°F Calibration Automatic in 1 or 2 points Probe Amplified pH/ORP/°C probe MA923D/1 Environment from 0 to 50°C/from 32 to 122°F; R.H. 100% Max Battery/Life 1 x 9V/500 hours of continuous use Auto-off after 8 minutes of non use Dimensions 200 x 85 x 50 mm Weight 260 g (with battery)		Price:	QTY: