Grain Cracker and Mill – Golia 1 Hp for great flour -The big fella!
This grain mill is for serious milling, high production and low energy consumption, suited for those that intend to do larger quantities for longer periods of time at 1 Hp for great flour, does 80 to 240 Kg per hour. Cereal grinding is possible thanks to a blade lock, cereals enter the grinding chamber with a self-regulated process. In the case of the finer flour for bread making, a 1mm sieve (supplied) is recommended,
slowing it down to 50 kg per hour. Or use the 1 1/2 mm sieve for Polenta, being slightly less fine, but increasing production volume a little. This sieve can replace the 1mm if we are informed.
The system will not add total freight for this item, so please note we will add an amount, to get a total of $110 manually, for basic freight for the whole of Australia
This Golia grain cracker and flour mill is for serious milling, high production and low energy consumption, suited for those that intend to do larger quantities for longer periods of time at 1 Hp for great flour, does 80 to 240 Kg per hour. Cereal grinding is possible thanks to a blade lock, cereals enter the grinding chamber with a self-regulated process.
The different sieves (the machine is equipped with six, to control the consistency of the flour) can be changed, from producing flour for breadmaking to extracting large amounts of a combination of first rate flours and broken cereals. Sieve sizes: 1.5mm, 2mm, 4mm, 6mm and 8 mm. Dust proof output bucket supplied as standard.
For example if using a larger sized sieve, you would produce less flour and more cracked grain, this cracked size determined by sieve used, but if you use the finer sieves, you will produce only flour.
Robust plastic case, CE approved (If you want all Cracked and no flour at all, Bravo model would suit, due to flexible hammers)
Perfect for stores and country milling on site, seeing that the unit can run for prolonged periods of time, though depending on prevailing temperature, it can be run for up to an hour before a short break and restarting again.
The inbuilt heat detector automatically switches the unit off if it is over heated, to protect the motor.
Packing size: 75ht x53w x47cm Depth, Weight 19 Kg. Assembly size 98 H x 60 W x 60 cm Deep. Power 220/230 Volts, 10 Amps, 750 Watts. (U.S. orders need step up transformers)
Important note: The system will not add freight for this item, so we add manually $96 for basic freight for the whole of Australia.and allow about one week for delivery, sometimes a little longer depending on area.
Freight cost to USA works out close to $700 by air, note that a step up transformer is required to convert 120 volt to the required 240 operational voltage..
Any attempt to gain access to moving parts inside while turning, will result in automatic shut down for the protection of users/children.
Warranty on the replacement/delivery of parts valid for 12 months